CMH-35

product-single

CMH-35

CMH-35 is a half-automatic hydraulic trimming machine for cutting off of the springs, spring ends and spring legs.

Category:

Description

Half-automatic hydraulic/pneumatic trimming machines for cutting off of the springs, spring ends and spring legs. Now the CMH-8/16/35 machine is equipped with special hydraulic system, which allows to cut faster and more effective. With stroke adjustment of the cylinder you are saving a lot of time for cutting smaller wire sizes and you increase your productivity.

Find out more on our Vimeo page .

Additional information

Wire

10,00 mm (.394"), 12,00 mm (.472"), 13,00 mm (.512"), 14,00 mm (.551"), 16,00 mm (.630"), 18,00 mm (.709"), 20,00 mm (.787"), 35,00 mm (1.378")

Way of coiling

Cold

Wire material by tensile strength

1300 N/mm² / MPa, 800 N/mm² / MPa

Productivity pcs/min

01, 02, 03, 04, 05, 06, 07, 08, 09, 10

Additonal information

 CMH-5CMH-8CMH-16CMH-35
Max. wire diameter acc. to EN 10270-1 DH ph
(ASTM A228 Music Wire)
5,00 mm
.196"
8,00 mm
.314"
16,00 mm
.630"
35,00 mm
1.378"
(50CrV4)
Spring outside diameter rangeup to 60,00 mm
up to 2.362"
up to 100,00 mm
up to 3.937"
35 - 200
1.378" - 7.874"
acc. to your needs
Hourly output (pieces)ca. 900ca. 600ca. 600ca. 600
Driving systempneumatichydraulichydraulichydraulic

Media