CMH-16

CMH-16

CMH-16 is a semi-automatic hydraulic trimming machine for cutting off of the springs, spring ends and spring legs.

Category:

Description

Semi-automatic hydraulic/pneumatic trimming machines for cutting off of the springs, spring ends and spring legs. Now the CMH-8/16/35 machines are equipped with special hydraulic system, which allows to cut faster and more effective. With stroke adjustment of the cylinder you are saving a lot of time for cutting smaller wire sizes and you increase your productivity. For chrome silicon gigh tensile wire we offer upon request also even faster hydraulic units for fast cut off. Ask for more details!

Find out more on our Vimeo page .

Additional information

Wire

05,00 mm (.197"), 06,00 mm (.236"), 07,00 mm (.276"), 08,00 mm (.315"), 09,00 mm (.354"), 10,00 mm (.394"), 12,00 mm (.472"), 13,00 mm (.512"), 14,00 mm (.551"), 16,00 mm (.630")

Productivity pcs/min

01, 02, 03, 04, 05, 06, 07, 08, 09, 10

Way of coiling

Cold

Wire material by tensile strength

1300 N/mm² / MPa, 800 N/mm² / MPa

Additonal information

 CMH-5CMH-8CMH-16CMH-35
Max. wire diameter acc. to EN 10270-1 DH ph
(ASTM A228 Music Wire)
5,00 mm
.196"
8,00 mm
.314"
16,00 mm
.630"
35,00 mm
1.378"
(50CrV4)
Spring outside diameter rangeup to 60,00 mm
up to 2.362"
up to 100,00 mm
up to 3.937"
35 - 200
1.378" - 7.874"
acc. to your needs
Hourly output (pieces)ca. 900ca. 600ca. 600ca. 600
Driving systempneumatichydraulichydraulichydraulic

Media