To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Description
Automatic servo controlled hydraulic spring lathe coilers WIM CNC are used for COLD production of right and left coiled cylindrical and one side conical* compression, extension and torsion springs, different wire forms* and double torsion springs (double torsion springs on request only – see also our).
Through the use of up to 5 controlled axis (4AX + 5AX system*) you can reach higher productivity and a lot of possibilities for production of different wire forms. The machine pulls in, coils and cuts completely automatically.
The machine can be equipped also with WCS* wire catching system for the 1st coil. Through the use of WCS* you can produce completely automatically compression and extensions springs (without scrap). The HMI CNC control unit (available only on standard systems) is very user friendly and has a lot of possibilities.
The new designed graphical SpringMaster software SM4(available on 4AX and 5AX systems) is unique software specially designed by our team for use with WIM CNC machines. The software is „learning“ with each programmed spring or wire form. That means that with each next program the machine is more adapted to the operator in order to implement better his wishes. Additionally there is very nice feature of managing the made springs with an external backup option.
The principle of this machine is: SET UP – START – WALK AWAY.
* for details see the chart below with the link for each machine type
Find out more on our Vimeo page .
Additional information
08,00 mm (.315"), 09,00 mm (.354"), 10,00 mm (.394"), 12,00 mm (.472"), 13,00 mm (.512"), 14,00 mm (.551"), 16,00 mm (.630"), 18,00 mm (.709"), 20,00 mm (.787"), 35,00 mm (1.378")
Cold
Compression, Tension, Torsion, Wire bending
>2.000 N/mm² / MPa, 2000 N/mm² / MPa, 1300 N/mm² / MPa, 800 N/mm² / MPa
01, 02, 03, 04, 05, 06, 07, 08, 09, 10
Additional information
(.315" - 1.417")
(.315" - .787")
mandrel size 25 - 180 mm (with reduction 220 mm)
1.575" - 9.842"
mandrel size .985" - 7.086" (with reduction 8.661")
39.37"
2000 mm
78.74"
(15.74") / unlimited
- up to 20,00 mm (.787") EN 10270-1 DH ph
- up to 30,00 mm (1.181") 50CrV4
15,000 pound
14 x 5 x 6.3 feet (without vertical reel)
24.0 - 100.0 mm (.944" - 3.937")
(against additional charge)
- up to 16,00 mm (.630") for EN 10270-1 DH ph
- above 16,00 mm (.630") the springs are coiled with manual wire catcher (included) and are cut on the legs
Media