LDT-DT-12 - Fortuna Federn

LDT-DT-12

LDT DT-12 CNC coiling machine for production of spring tines (double torsion springs) from pre-bent “U” forms (hais-pins) up to 12,00 mm. The bent “U” forms (hair-pins) can be made on our LDT OBL-12 CNC machine. Combination of these two machines and for additional bends our BEM CNC line you are able to produce cost-effective complete double torsion springs.

Description

LDT DT-12 CNC coiling machine for production of spring tines (double torsion springs) from pre-bent “U” forms (hais-pins) up to 12,00 mm. The bent “U” forms (hair-pins) can be made on our LDT OBL-12 CNC machine. Combination of these two machines and for additional bends our BEM CNC line you are able to produce cost-effective complete double torsion springs.

Find out more on our Vimeo page .

Additional information

Wire

06,00 mm (.236"), 07,00 mm (.276"), 08,00 mm (.315"), 09,00 mm (.354"), 10,00 mm (.394"), 12,00 mm (.472")

Productivity pcs/min

01, 02, 03, 04, 05

Way of coiling

Cold

Type of spring

Double torsion

Wire material by tensile strength

1300 N/mm² / MPa, 800 N/mm² / MPa

Additional information

LDT-DT- 6LDT DT-12
Spring steel wire range acc. to
EN 10270-1 DH ph
3,00 - 6,00 mm
.118" - .236"
6,00 - 12,00
.236" - .472"
Min. spring OD15,00 mm
.59" - 2.36"
30,00 mm
1.18" - 3.93"
Productivity (pieces/hour)cca. 300cca. 300
Drive2 x servo4 x servo
Mandrel positioningpneumaticservo
Accessories (included in the price)1 set of tooling
acc. to the client's requirment
1 set of tooling
acc. to the client's requirment
SoftwareGerman / EnglishGerman / English
Dimensions LxWxH cca.120 x 80 x 120 cm
3.94 x 2.62 x 3.94 feet
135 x 88 x 120 cm
4.43 x 2.89 x 3.94 feet
Weight cca.600 kg
1,350 pounds
800 kg
1,750 pounds

Media