Configurator

Filter products / Showing 13 - 24 of 42 results
Type of spring
Wire material by tensile strength
Wire diameter
Productivity pcs/min
Way of coiling
  • COM-10 CNC

    The COM CNC spring coilers are running with servo motor driven axes. These machines are designed for production of cylindrical (compression and extension), conical springs (one side, both sides) and rings from round spring steel material almost all qualities. The machines are equipped with 2-coiling points system. They run cam-less (direct driving and direct control) for right and left coiled springs.

    Find out more on our Vimeo page .

  • COM-12 CNC

    The COM CNC spring coilers are running with servo motor driven axes. These machines are designed for production of cylindrical (compression and extension), conical springs (one side, both sides) and rings from round spring steel material almost all qualities. The machines are equipped with 2-coiling points system. They run cam-less (direct driving and direct control) for right and left coiled springs.

    Find out more on our Vimeo page .

  • COM-16 CNC

    The COM CNC spring coilers are running with servo motor driven axes. These machines are designed for production of cylindrical (compression and extension), conical springs (one side, both sides) and rings from round spring steel material almost all qualities. The machines are equipped with 2-coiling points system. They run cam-less (direct driving and direct control) for right and left coiled springs.

    Find out more on our Vimeo page .

     

  • COM-20 CNC

    The COM-20 CNC spring coilers are running with servo motor driven axes. These machines are designed for production of cylindrical (compression and extension), conical springs (one side, both sides) and rings from round spring steel material almost all qualities. The machines are equipped with 2-coiling points system. They run cam-less (direct driving and direct control) for right and left coiled springs.

    Find out more on our Vimeo page .

  • SCPC Camera Measuring System

    SCPC vision/camera spring gage measuring systems for our COM CNC spring coilers is modern and intelligent solution for continous control and correction of the coiled springs.

  • Custom-built

  • WIM T CNC

  • GRM-6 CNC

    Our GRM-6 CNC servo controlled spring end grinders are used for horizontal crush or down-feed grinding up to 6,00 mm of wire diameter. The automatic height adjustment in coordination with the number of revolutions of the grinding wheels increases the capacity. The programmable control technology for the loading table simplifies the loading of the machine. The automatic unloading and manual compensation of grinding wheel wear increase the productivity even more. HMI CNC control unit has a lot of set up possibilities what makes the work with the machine easy.

    Find out more on our Vimeo page .

  • GRM-9 CNC

    Our GRM-9 CNC servo controlled spring end grinders are used for horizontal crush or down-feed grinding up to 9,00 mm of wire diameter. The automatic height adjustment in coordination with the number of revolutions of the grinding wheels increases the capacity. The programmable control technology for the loading table simplifies the loading of the machine. The automatic unloading and manual compensation of grinding wheel wear increase the productivity even more. HMI CNC control unit has a lot of set up possibilities what makes the work with the machine easy.

    Find out more on our Vimeo page .

  • GRM-13 CNC

    Our GRM-13 CNC servo controlled spring end grinders are used for horizontal crush or down-feed grinding up to 13,00 mm of wire diameter. The automatic height adjustment in coordination with the number of revolutions of the grinding wheels increases the capacity. The programmable control technology for the loading table simplifies the loading of the machine. The automatic unloading and manual compensation of grinding wheel wear increase the productivity even more. HMI CNC control unit has a lot of set up possibilities what makes the work with the machine easy.

    Find out more on our Vimeo page .

  • GRM-16 CNC

    Our GRM-16 CNC servo controlled spring end grinders are used for horizontal crush or down-feed grinding up to 16 mm of wire diameter. The automatic height adjustment in coordination with the number of revolutions of the grinding wheels increases the capacity. The programmable control technology for the loading table simplifies the loading of the machine. The automatic unloading and manual compensation of grinding wheel wear increase the productivity even more. HMI CNC control unit has a lot of set up possibilities what makes the work with the machine easy.

    Find out more on our Vimeo page.

  • HMV – Power Reels